How To Clean A Jetted Bathtub

Taking a long and relaxing bath in your jetted bathtub is one of life’s greatest pleasures. This is the reason why more and more people are upgrading to this type of tub while renovating their bathrooms.

However, the biggest challenge that people usually face is keeping it clean. If you use it often, the bathtub will accumulate dirt faster, and if you delay the cleaning task, it can become a breeding ground for germs and bacteria.

Thus, people contact reputed companies that offer budget end of lease cleaning in Brisbane. They have experienced and knowledgeable professionals with advanced tools.

However, it is also possible to clean it at home with the correct guidance. Here is a detailed procedure to clean a jetted bathtub. It will help you to maintain its cleanliness in a hassle-free manner. Let’s have a look.

• Vinegar
• Baking soda
• Measuring cup
• Toothbrush
• Bucket
• Soft cloth
• Dental floss (optional)
• Dishwashing liquid or powder (optional)
• Bleach (optional)

First Step: Remove Collected Gunk and Germs from Internal Tub Plumbing

First, remove any hair or other visible debris from the rim. After that fill the bathtub until the water reaches at least a few inches above the bathtub jets. If you haven’t cleaned the tub for an extended period, it will be more effective to fill the tub with hot water. Once the bathtub is filled, you can use numerous cleansing agents. However, before you use any of the agents, it is advisable to consult the manufactures or suppliers.

• The best option is to pour around two to three cups of vinegar into the bathtub water. Because of the acetic acid present in it, vinegar can effectively dissolve the dirt buildup. And unlike a commercial product, it can accomplish the cleansing task without causing any damage to the surface of the bathtub and your health.
• In case you don’t want to use vinegar or there is a problem of availability, bleach is an alternative for you. Pour around 1/2 cup of bleach into the water and add a few teaspoons of liquid or powdered dishwashing detergent. Be a little careful while using the bleach because many manufacturers do not recommend it as it can dry out the gaskets gradually. So, if you don’t want to take any chances, contact a reputed company offering end of lease cleaning in Brisbane.
• Another option is to simply opt for any commercial products that have been formulated especially for washing the jetted tubs. Before using any such product, properly read the instructions on the packaging.

Second Step: Turn Off the Valves of The Air-Induction

Once you have washed the gunk and germs from internal tub plumbing, it is time to activate the jets. However, before you turn on the jets, it is essential to turn off the valves of the air-induction.

In many cases, the manufacturer of your tub especially recommends to leave them open. Thus, it is crucial to follow the instructions properly.

Closing the air-induction valves will force the water to pass through only the internal plumbing of your bathtub. This enhances the flow, and as a result, it gives you a deeper cleansing.

Whether the valves are open or not, run the jets on high for around 15 to 20 minutes or until the dirt of the internal plumbing gets cleaned permanently.

Third Step: Gently Scrub the Bathtub with Baking Soda

In the next step, you need to clean the surface of the bathtub. Numerous commercial products are available in the market for this purpose, but most of them are loaded with harmful chemicals.

These chemicals can cause damage to the bathtub’s surface and also pollute the environment. You should opt for natural household products like baking soda.

If you choose a company that offers eco-friendly end of lease cleaning in Brisbane, you will see that their professionals also use baking soda. It is an excellent way to get rid of mildew, mould, and soap scum.

Sprinkle sufficient amount of baking soda evenly on the surface of the bathtub and allow it to settle down for several minutes. After that, take a soft, dampened cloth to scrub the surface and remove the grime.

If you want, you can also use this household ingredient on the faucet as well as the drain. One thing you should always remember is that while cleaning the surface, never scrub it too vigorously.

Most of these tubs are made of acrylic material. Such materials usually do not get scratched or gouged easily, but if you are not careful, it can leave some marks on the surface.

Fourth Step: Use a Toothbrush to Clean the Jets

Once you are done with the surface, it is time to address the dirt and germs that may be stuck in and around the water jets. For this purpose, a toothbrush can come handy. It can deeply clean the gunk accumulated around the jets. Take an old toothbrush and gently brush the jet nozzles.

If you can find deposits on the nozzle that cannot be cleaned with a toothbrush, try to remove it with dental floss. Do not forget to clean the air intake cover. To clean it, first, unscrew it, give it a soapy scrubbing, then wash it off, and finally screw it back into its position. Then wash your bathtub thoroughly.

Fifth Step: Wash the Bathtub One More Time

After cleaning the bathtub properly, wash it one more time. Fill the tub again with warm water a couple of inches above the jets. Then run the jets on high for around 10 to 15 minutes to remove even more gunk.

At last, drain the water. Cleaning the bathtub requires some time and a little know-how. Thus people usually prefer to have experienced professionals who provide cheap end of lease cleaning in Brisbane. They have the knowledge and the right supplies to clean it.

Conclusion

Your jetted bathtub not only gives you a spa-like experience right in the home but also gives your bathroom a sophisticated touch. But you need to make sure that it is properly clean. The procedure mentioned here will help you to keep it in its best shape.

If you are not sure that you will be able to clean it properly or don’t have enough time, go for end of lease cleaning in Brisbane. They will save you time and ensure high-quality cleaning.