What is The Fastest Way To Clean A Shower Head?

Is your showerhead not providing consistent water pressure? Showerheads often spray uneven water due to clogged drains with mineral deposits and soap residue. This is a clear sign that it could need a deep cleaning and sanitising. Most people often forget to clean dirty showerheads when sprucing up their dirty bathrooms. There is no denying that this particular place harbours lethal germs and bacteria that can lead to various health-related problems. Still, you need to focus on every nook and cranny, including your toilet seat, bathtub and sink. Descaling the showerhead is also an important part if you want a clean and shiny bathroom at the end of the day. It is important to book professionals for a detailed bond cleaning Brisbane if you move out of your rental property. They perform the cleaning job according to the pre-approved checklist with the sole of getting your full bond money back without any dispute. However, if you are looking for the fastest way to clean your showerhead using natural cleaning products, read the following DIY cleaning tips and tricks. Let’s Get Started!

Steps to Clean Shower Head Quickly without Removing It

If you are running out of time, then skip removing the showerhead and follow these hacks to remove mineral deposits and soap residue. Step 1: Arrange All the Necessary Cleaning Supplies You don’t need fancy or expensive cleaning products because they are laden with harmful chemicals, such as ammonia. Instead, arrange the following materials:

A plastic Bag

A rubber band

Warm water

White Vinegar

Step 2: Secure Bag with Vinegar Fill a plastic bag with hot water and white vinegar. Attach that bag to the grimy shower head by slipping the top edge underneath the rubber band to secure the bag to the showerhead. Step 3: Leave it for an Hour Wait at least an hour. This solution will break down mineral deposits, stubborn stains, rust stains and soap residue. Step 4: Rinse the Showerhead Remove the bag and turn on the water to get rid of solution residue. Do not forget to polish with a soft cloth. You can also use baking soda to achieve sparkling results. It is a homemade carpet deodoriser and odour killer and can be used on almost all surfaces.

Tips to Deep Clean Your Showerhead

If you still see a thick layer of mineral deposits on your showerhead, follow these tips and do a thorough cleaning. However, this may take a bit of elbow grease and your precious time, but you will witness sparkling results without any doubt: 1. Disconnect the Shower Head Make sure you unscrew your shower head before getting into the cleaning process. You can also call the local handyman in Brisbane to do this job. If you are doing it yourself, be sure you don’t damage the finish of your fixture, especially if you are on the rental property. Cushion your tool using a rag to avoid scratches. 2. Rinse it Off Hold your shower head upside down to wash it with running water. Remove the loose debris and other grime using plain water. 3. Apply White Vinegar Solution To remove stubborn stains and mineral deposits, you can apply the white vinegar solution and rub it with an old toothbrush. This will help you get rid of loose debris. Do it with your gentle hands. 4. Apply Baking Soda You can also use baking soda paste to scrub stains off your showerhead. This is one of the most effective cleaning agents that also work as a stain remover. You can easily get rid of calcium deposits, tough stains, loose debris and soap scum by scrubbing the surface using a soft-bristled brush. 5. Rinse and Reassemble Rinse the showerhead and buff dry it before reassembling it to the shower. You can wrap new plumbing tape around the threads of your shower arm to give a perfect seal. Reattach it using a wrench and remove the soft rags after completing your cleaning job. You can hire professionals for a thorough house cleaning. You should know the importance of keeping your kitchen clean and bathroom sanitised.

Things you Should Avoid When Cleaning Your Showerhead

If you want to keep your water pressure steady and remove the bacterial growth at bay, clean your showerhead every week or twice a month. You should include this in your bathroom cleaning checklist. Make sure you avoid the following things:

Do not use ammonia or bleach to remove stains from your showerhead

Never use a hard-bristled brush, as it will leave scuffing and scratching behind.

Avoid using conventional or store-bought cleaners as this could damage the finish of your chrome.

It is good to hire professionals for a thorough bathroom cleaning if you are moving out of your rental property. It is one of the most important phases where tenants could lose deposited security if they leave the property in a dirty condition.

Conclusion

You can try the fastest way to clean your dirty showerhead when doing it yourself. The tips shared above in the article also include a deep cleaning way to clean the shower head from scratch. You can also hire professionals for quality bond cleaning in Brisbane to safely retrieve bond money.