Say Goodbye To Grime: The Ultimate Toilet Cleaning Guide

Did you know an average toilet seat harbours more than 200 bacteria per square inch? The toilet bowl rim and the surface below the water line tend to accumulate scaly biofilm, a thin yet hardened layer of microbial growth.

These are often contaminated with S enteritidis and E. coli, which may cause diarrhea, stomach cramps, and underlined diseases if not disinfected properly. Even using basic toilet cleaners doesn’t banish unseen threats from your toilet seat.

All you need is a proper cleaning strategy and proper tools to cover crevices and hidden spots. It is always good to start with visible brown stains, grime and gunk before disinfecting inside and outside the toilet bowl, including dry areas. While regular cleaning can help maintain a clean bathroom, deep cleaning of the toilet and other fixtures can help create a blissful and hygienic indoor environment.

So, here is a comprehensive cleaning guide to eliminate nasty stains, grime, grease and germs from the toilet bowl, seat and crannies like a pro. A sparkling clean and disinfected bathroom can also leave a great impression on your landlord during the end of a tenancy in QLD.

1. Cleaning Supplies You’ll Need

Stocking up on all the necessary cleaning products and tools can streamline the entire session while saving your precious time. That’s why experts come fully equipped for a budget bond cleaning Brisbane. All you need:

• A toilet brush
• White Vinegar
• Baking Soda
• Castile Soap
• Hydrogen Peroxide
• Pumice stone
• Rubber Gloves
• Hot Water Bucket

Tip: Avoid harsh chemicals like ammonia, bleach and phthalates to prevent indoor air pollution and allergy triggers.

2. Drain Water From the Toilet Bowl

To increase cleaning effectiveness, drain the water from the bowl. This helps the cleaning agent work efficiently, saving you time and energy. Pour a bucket full of hot water down the drain and wait for a few seconds.

3. Tackle Hard Water Stains Inside the Toilet Seat

It is good to flush the toilet to reduce the water level. Next, pour a cup of diluted white vinegar into the bowl, covering nooks and crannies to dislodge hard water stains. Let it rest for 20-30 minutes. The vinegar will cut through mineral deposits and gunk effectively. For scrubbing, use a toilet brush and gently scrub the surface.

You can also sprinkle baking soda to lift the remaining gunk and lethal bathroom bacteria. Let it sit for another 10 minutes, and gently scrub it with a pumice stone. Ensure you do it carefully to prevent scratches on the porcelain surface. Flush and see sparkling results!

4. Banish Nasty Brown Stains With Hydrogen Peroxide

Toilets are often laden with icky brown stains due to rust buildup and microbial growth. It is a misconception that you need abrasive and harsh products to banish these stains. In reality, hydrogen peroxide, an effective oxidizing agent, can do wonders. It not only lightens brown stains caused by mould, limescale, and organic buildup but also kills harbouring germs.

Ensure you pour 1 cup of 3 per cent hydrogen peroxide into the toilet bowl or an affected area. Allow it to sit for half an hour to break down organic buildup. Next, scrub with a brush, focused on stains and crannies. Lastly, flush to rinse the bowl. That’s how you say goodbye to unpleasant and lethal gunk. If you are concerned about the entire rental home at the end of your tenancy, book professional bond cleaning Brisbane experts and stay relaxed. They can help you secure full bond money without any dispute or disagreement.

5. Clean and Disinfect Under the Rim: Eliminate Scaly Biofilm

Scaly biofilm is a common microbial growth caused by mineral deposits, mould, and bacterial infestation. It often grows in hidden, damp areas, like under the rim and underneath the water line.

To banish this gunk, spray white vinegar and warm water solution. You can also apply borax powder. Leave it for 30 minutes to an hour for hassle free scrubbing. Ensure you use an angled bristled brush to reach under the rim.

6. Deep Clean From Outside

Don’t just stick to the bowl. Ensure you deep clean and disinfect the exterior parts of the toilet. Spray white vinegar on the toilet seat, tank, handle/flush, and the S bend to remove stains and germs. Scrub with a sponge or a microfiber cloth for that gleaming look. For hard to reach spots like the toilet seat hinge, bond cleaners in Brisbane recommend using an old toothbrush. It can easily dislodge the gunk from tight spaces, leaving your toilet sparkling and hygienic.

7. Pay Attention to the Surrounding Areas

Don’t forget to clean the area around your toilet to kill lethal germs and gunk using methylated spirits.  Ensure you scrub using  a sponge to clean the walls, while a microfiber mop is ideal for floors and a brush for fixtures. You can clean floors with castile soap or other mild detergent. This helps you maintain a healthy, hygienic and sparkling bathroom.

8. Clean the Toilet Brush and Holder

Once you have spruced up your toilet, deep clean the brush and the holder to keep germs at bay. Sprintz the brush with rubbing alcohol and leave it for a few minutes, then rinse with hot water in the bucket. Also, spray the same solution down the toilet brush holder, covering nooks and crannies. Rinse and dry completely to prevent mould growth.

Tips to Deep Clean Your Toilet

Wrapping up

Toilet cleaning is one of the most essential tasks for maintaining a clean, healthy and hygienic home environment. Hopefully, the tips shared above in this article helped you understand the right ways to clean the toilet bowl, area under the rim, crannies, flush handling and other areas like a pro. Ensure you use only eco friendly products to keep gunk and grime at bay.