People choose floorboard over other flooring options like carpets and concrete due to its classic beauty and durability. However, cleaning such a floor can be a challenging and risky task. Any abrasive scrubber, harsh chemicals or even too much water can damage the boards.
You also cannot neglect its cleaning because the accumulated dust and dirt can diminish its beauty and worsen
the indoor air quality. Therefore, you must figure out the correct way to clean the floorboards.
If you are moving out of a rental house that has such a floor and you want to clean it perfectly, avoid DIY methods. Instead, contact a company that offers reliable bond cleaning Brisbane. They have expertise in removing dust, dirt, stains, etc., without causing any damage to the surface. If you want to do it yourself, make sure you have some proper knowledge.
Read on to know more about how to clean floorboards.
General Cleaning of Floorboards
The general cleaning of the floorboard doesn’t take much time or effort. It prevents the build-up of dust and dirt, makes deep cleaning more effective and increases the life of the board.
Understand unfinished vs. finished floors
Knowing whether your floorboards are finished or unfinished is the first and most important step in their cleaning. To check the surface, add a few drops of water to the hidden area of the floor. After a few minutes, if the drops stay as it is, it means the board is finished.
However, if it looks like it absorbed or darkens the spot, it is not. In that case, you should contact a bond cleaning company in Brisbane because their professionals have proficiency in cleaning such surfaces.
Use a Soft-bristled Broom to Sweep the Floorboard
Sweeping the floor will get rid of pieces like grit or sand that can cause harm to the surface if they get caught under a mop. You can also vacuum the floor as long as there is only dust on it and the bristles are soft to prevent scratching. It is one of the
simple house cleaning hacks you should never forget.
Avoid Frequent Mopping
To maintain the floor clear of dust and potential scratching materials, you should sweep and/or vacuum a few times a week. However, you should only deep clean your floorboard when it is truly required. Since the surface does not collect dust or debris quickly, floorboards are easy to clean. Most dust and dirt could remove with a simple sweep or vacuum.
Remove Spills Immediately
You should never let moisture sit on floorboards, regardless of the finish. If you are not careful, it could permanently harm both the finish and the board. After wiping it off with a moist cloth, properly dry the surface.
Deep Cleaning of Floorboards
From time to time, you need to clean your floorboards thoroughly to remove the dirt layer. If you want to deep clean the floor professionally, contact trained cleaners who offer
bond cleaning in Brisbane, Queensland. They will give you the best possible result.
Prepare Cleaning Solution
Pour 1/4 cup of white vinegar into a gallon of warm water in a bucket. Mix it properly to create a natural cleanser that removes stubborn dirt. The vinegar contains acid, so using it in excess quantity can damage the finish that protects the board surface.
For a pleasant scent, you may also add a few drops of essential oil like lavender and lemon. Using essential oil to add shine and a fresh smell is one of the best
house cleaning hacks that actually work!
Dampen a Mop in the Solution
Soak the mop in the solution and wring it properly before using it on the surface. It is essential because too much water can damage the surface of the floorboard. Use a microfiber or spray mop instead of cotton since wringing can be challenging with cotton mops. Use a sponge or towel to clean minor spots.
Mop the floor
Use the damp mop to sweep the entire floor. Any debris will be removed on the first pass. To get rid of all the dirt, you might need to go over the area again. Make sure to wash the mop in the sink with hot water when streaks appear. If the solution looks dirty, replace it.
Remove Excess Water
You might see water on the board surface after mopping. Do not allow the moisture to sit on the surface. To quickly remove extra water, use a clean, absorbent towel. Professionals also follow a similar approach.
Buff the Floor
At last, you need to dry the floor with a fresh, non-abrasive towel. Attaching it to the mop is one method of doing this, but it is advisable to do it by hand and work in the grain’s direction. It will not only make your floor sparkle, but it will also make sure that no water is left on the surface.
The Bottom Line
Cleaning the floorboards doesn’t have to be a complicated task. You just need to follow the ways mentioned above to make it look sparkling clean. If you want to avoid the stress and hassles of cleaning the boards or do not want to take any chance, contact a company that offers the best bond cleaning in Brisbane.
Hiring Professionals is highly recommended when moving out of the rental property. They can help you
get back the bond money without any disputes.
