Cleaning Walls: A Beginner’s Guide

Cleaning Walls: A Beginner’s Guide

By : Angelina
When it comes to house cleaning, people usually focus on the floor, countertops and other similar surfaces. Walls are often ignored because removing the dirt and stains from the surface is time-consuming and risky. If you use harsh chemicals or inappropriate tools and methods, the surface of the walls can easily get damaged. Therefore, you need to find out some ways that can help you to clean the walls safely. Stains or dirty patches on the walls of the rental property can be a matter of dispute with the landlord. So, when you decide to move out, hire professionals who offer the best bond cleaning Brisbane. The experts will spot clean the walls that can help you to get back the bond money. However, if you want to do it yourself but don’t know the correct method, you will need the right knowledge. Here is a beginner’s guide for cleaning walls.

Preparation

The first thing you need to do is to prepare for the wall cleaning. Otherwise, you will find the task complicated, and you might not also get the desired result.
  • Cover all the furniture in the room and carpet with newspapers or old sheets. It will help you to keep the other belongings safe from the dust, dirt and solution.
  • Remove everything hanging on your walls. It includes paintings, picture frames, wall clocks, etc.
  • Remove the dust from walls using a vacuum cleaner. Use a soft bristle attachment to prevent any scratch marks. An extendable duster can also be useful as it can reach high places and corners. It is one of the simple house cleaning hacks you must follow.
  • Also check the finish of the wall. If the surface is glossy, it may endure some elbow grease. In case it has matte finishes, you need to be a little careful.

  • Flat, Satin and Eggshell Paint Finishes

    If you have flat, satin or eggshell paint finishes on your walls, you cannot afford to scrub vigorously or use an abrasive scrubber. Otherwise, it will remove the paint. You should also avoid using any harsh chemicals. Instead, follow the simple steps mentioned below.
  • Prepare a cleaning solution at home: You need to mix a few drops of dish detergent in 2 litres of warm water. If you do not have dish detergent, you can also use vinegar.
  • Clean the wall surface: Now, dip a sponge into the solution and squeeze it to avoid excess moisture on the surface. Start wiping the walls from top to bottom, then move towards the right side. If you are not satisfied, repeat the process.
  • Allow the surface of the Wallsto air dry: If you are happy with the result, turn on the fans and also the walls to get air dry. You can also open the windows and door to dry the walls even quicker.

  • Gloss and Semi-gloss Paint Finishes

    Gloss and semi-gloss paint are usually used on kitchen walls. So, the paint finishes are tough enough to bear store-bought degreasing products, but you need to be careful to prevent scratches. If you want to do it on your own, follow these steps.
  • Use a mild degreaser for the kitchen: If cooking area has gloss and semi-gloss paintaround the stove that is often covered with spills and grease, opt for a mild degreaser. If you find it difficult, hire seasoned bond cleaners in Brisbane.
  • Prepare cleaner using natural products: For other places, you need to prepare a cleaning solution. Add white vinegar (0.25 teaspoons) and dish detergent (1 teaspoon) in warm water (950 ml) and mix properly.
  • Clean the walls: Dip a sponge into the before squeezing it properly. After that, clean your wall top to bottom and move towards the right side. Repeat the process if you are not happy with the result.
  • Let the surface dry: Once you are done with the cleaning, allow the walls to get air dry. Also, open the windows and turn on the fan. There are some important rules to follow during house cleaning, and improving ventilation is one of them.

  • General Cleaning Tips for Painted Walls

    Spills, fingerprints, scuff marks and stains on walls are common problems. You can either get rid of them by hiring a bond cleaning company in Brisbane or follow a DIY approach. If you have decided to perform the cleaning on your own, the following tips could be helpful.
  • Use a soft sponge and water: You can remove a lot of stains by using only water and a sponge. So, always try it before opting for other options.
  • Test a spot before cleaning: Wrong cleaners and tools can damage the paint of the walls. So, you must always use the mildest possible products. Also, make sure that you try it on a hidden spot to ensure its safety.
  • Use mild detergent and water: Take around 950 ml of warm water and add 2 to 3 drops of dish detergent. Mix it well and dip a soft sponge. Wring it properly and wipe the spot. Avoid using store-bought cleaners because the chemicals in such products can pollute the environment.
  • Use a Magic Eraser: It is very effective against pencils, crayons and scuff marks. All you need to do is to hold it under running water and then rub it on the stains until they disappear.

  • The Bottom Line

    Removing dirt and stains from your walls doesn’t have to be a challenging task, even if you are doing it for the first time. All you need to do is to follow the ways mentioned above. If you want to avoid the stress and hassles of cleaning the walls and other surfaces, contact professional bond cleaners Brisbane. They can make your walls look spotless.