Have you noticed that the grout between your shower tiles has become yellow and stained over time? Before you think of replacing this grout, you should try a few home remedies that are simple and cost-effective and can help save your shower grout.
It is important to not only clean your tile grout to remove stains and discolorations but also to protect your family’s health. This is because grout is porous and made from cement and can easily absorb dirt, allergens and mineral deposits.
These allergens attract bacteria, germs, mould, and mildew, which are very harmful for your health.
Therefore, to keep your indoor air quality safe from these germs, mould spores and allergens and to keep your grout sturdy and sparkling, you should use the tips given below.
However if you are at the end of your tenancy and do not have time to do this on your own, you can always hire
bond cleaning Brisbane services to scrub and clean this tile grout for you.
Why You Should Clean Your Shower Tile Grout
It is important to clean your shower tile grout because its porous nature can attract mould spores and
harmful bacteria like Streptococcus, E.coli, Staphylococcus, Salmonella and Campylobacter. These can cause severe allergies and infections like sore throats, abdominal pain, nausea, cellulitis and more and affect indoor air quality.
Therefore, you should clean your shower tile grout daily with a homemade cleaning solution and scrub your floor tile grout once a week.
Tips
Here are some expert tips to
clean your floor tile grout.
Tips For Cleaning Your Shower Tile Grout
Now that you know why it is important to clean your shower tile grout, you should use simple homemade solutions and the steps given below to start the process:
1. Use A Soft-Bristled Brush Or Toothbrush To Remove Dirt
First, spray the grout with hot water and then use a soft-bristled brush or toothbrush to wipe the area and remove dirt and debris. Make sure you move along the grout lines to avoid missing any spots and get all the dirt out.
Tip
Here is how you can
remove grout stains from your kitchen.
2. Spray Vinegar To Get Rid Of Embedded Debris
Next, pour a solution of equal parts of white vinegar and water into a glass spray bottle. Then spritz this solution on your shower grout and leave it for 10-15 minutes. The acetic acid in vinegar is highly effective in removing embedded dirt, dust and mineral deposits from grout and will make it easier to clean these areas. After 10-15 minutes, scrub the grout with a toothbrush and rinse the solution with clean water.
3. Make A Paste Of Baking Soda For Tough Stains
If the vinegar solution does not work or your grout is badly stained, you can use baking soda and hydrogen peroxide.
Hydrogen peroxide removes tough stains and also works like bleach to whiten and disinfect your grout naturally. Baking soda, on the other hand, is alkaline and will scrub off dirt easily and deodorise the area.
To make this solution, bond cleaners in Brisbane recommend mixing two parts of baking soda with one part of hydrogen peroxide. Now, apply this paste onto the grout with a toothbrush and leave it for 15-20 minutes. Leaving the paste on the grout will increase its effectiveness and help remove stains easily.
After 20 minutes, use a toothbrush or soft-bristled brush to wipe the solution in circular motions and then rinse the area to reveal bright and clean shower grout.
4. Ventilate And Dry The Area To Prevent Mould
Next, you must turn on the exhaust fans in your bathroom or open a window to ensure that your grout dries fast. Proper
ventilation and air can help prevent dampness and mould on your tile grout.
5. Use A Grout Sealer To Keep Your Shower Tiles Clean
Once you clean and brighten your shower tile grout, you can use a sealer to keep it intact. To do this, let the grout dry and apply the grout sealer you choose between your tiles. If you prefer professional help, hire bond cleaners in Brisbane to seal your grout properly and prevent any damage to your shower tiles.
When Should You Change Your Grout
However, if your grout is crumbling and coming apart, it is better to change your shower grout rather than try to clean it. You can call a professional to do this or use a saw to remove your old grout and then apply the new paste with small strokes. Now let this paste dry so that it sets in between your tiles easily and prevents any water leakages.
Conclusion
The simple tips above will help you keep your shower tile grout clean and sparkling and prevent allergies and infections. You can also prevent mould spores and dampness on your grout by wiping down the tiles with a squeegee after every shower and using a solution of vinegar and water to remove dirt and mineral deposits.
