Vinyl siding is the exterior or outdoor siding for homes and small residential buildings. It is used for weatherproofing, decorating, imitating wood clapboard, etc. Plus, they are durable, affordable, captivating. Adding vinyl siding to your home can save your maintenance cost.
Make sure you keep the vinyl siding clean on a regular basis. Dust, dirt, mould, and grease on stylish siding can ruin your abode’s exterior look and feel.
Fortunately, you can achieve sparkling results using simple and eco-friendly products. If you are prepping your rental property and concerned about your deposited security, book a good company for a detailed bond cleaning in Brisbane. They will take care of everything, including your windows, blinds, curtains and vinyl siding, with the sole aim to help you pass the rental inspection.
However, if you want a regular cleaning guide for vinyl siding, consider the following steps and clean like a pro.
Step 1 : Arrange Necessary Cleaning Supplies
Remove mild as well as hard stains from vinyl siding quickly using the following cleaning tools and products:
- Nylon Scrub Pad
- Sponge
- Soft-Bristled Brush
- Bucket
- White Vinegar
- Warm Water
- Mild Dishwashing Liquid
Note: Avoid using store-bought cleaning products because they contain hazardous chemicals, such as ammonia, etc that can pollute the environment.
Step 2: Prepare A Homemade Cleaning Agent
Make sure your beautiful vinyl siding look as good as new, and for that, you need to remove dust, dirt, grime and stains from the surface.
All you need to do is mix one part of white vinegar and two tablespoons of liquid dishwashing soap into a bucket of warm water to
treat tough stains. This is one of the great cleaning solutions that can help you achieve sparkling results without releasing chemicals into the air.
Step 3: Tackle Stubborn Stains
Instead of using any abrasive tool, you just need a soft-bristled brush to clean your vinyl siding. Dampen the tool in the bucket and start from the bottom to remove grime, mould and stains.
For stubborn spots like paint, pen and tar marks, you can also use a nylon scrub pad or a bathtub cleaner.
Step 4: Use a Long-handled Tool For Better Cleaning
It is good to use a long-handled brush to reach the top surface of the siding. Make sure you use a soft brush because a bristled tool can damage your vinyl siding.
You can also consider hiring
professional bond cleaners in Brisbane if you are at the end of your tenancy. They will assist you throughout the process and help you get the bond back without a hint of stress.
It is also important to know when is the right time to hire end of lease cleaners , especially if you are running at low on budget. Make sure you do proper research and find a company that can give you exceptional outcomes within the given timeframe.
Step 5: Get Rid of Mould and Mildew
Make sure you thoroughly inspect the vinyl for mould and mildew stains. If there is a humid spot, you need to treat it as soon as possible. You can apply white vinegar solution or baking soda to scrub off black nasty stains using a soft-bristled brush or a pad. Pay more attention to these areas to achieve sparkling outcomes.
Step 6: Rinse Each Section
After removing tough stains, grime and grease, make sure you rinse it to remove soap residue. For that, you need a garden hose. This will quickly rinse the solution, dust, dirt, and debris from each corner from the vinyl siding you just scrubbed.
It is good to start from the upper section and make your way downwards and repeat the process if required.
Things to Keep in Mind Before Cleaning Your Vinyl Siding
Before getting into the cleaning process, take the following precautions in mind to determine if you need to replace any part or not:
Inspect the Overall Appearance of you Vinyl Siding
Check the surface for discolouration due to dirt, mould and excessive exposure to sunlight. It is good to replace the damaged part as soon as possible.
Check the Interior Walls
Sometimes, you may find mould and mildew build-up or cracks in the interior walls due to cracks in the vinyl siding.
Check for Broken and Warped Panels
Make sure you thoroughly check the entire siding and check for broken panels. The damaged ones need to be replaced to protect your abode from water damage.
Conclusion
These are easy and effective steps that will help you eliminate dust, dust mites, dirt, grime, grease, mould and mildew from the vinyl siding. Regular cleaning can help you maintain your home’s clean and beautiful exterior.
You can also prefer hiring trained professionals for an affordable bond cleaning in Brisbane to help you
get the bond back without any dispute. So, achieve best possible outcomes like a pro and make your vinyl siding as good as new in no time.
