Cleaning a home is a time-consuming task that requires a lot of planning, a little bit of know-how and elbow grease. That is why most people postpone the task for as long as possible. However, you should not delay the dusting and scrubbing of your household surfaces for too long.
Dirty household areas promote the growth of dirt, germs that deteriorates the quality of indoor air. As a result, it leads to various health issues and
respiratory diseases. Thus, instead of avoiding the task, figure out a systematic way to clean up the entire house that will give you the best result.
Many people prefer to contact a company that offers reliable bond cleaning in Brisbane. Their professionals use advanced tools and the latest methods to complete the task perfectly.
Whether you want to improve the hygiene of your abode or clean the rental property before moving out, the professionals will give you a flawless result. However, if you want to clean your home perfectly and on your own, you will need some guidance.
Here are the 7 steps to effective house cleaning and disinfecting.
Step 1: Plan and Prepare for the Task
When you want to clean and disinfect your house effectively, the first thing you need to do is to plan and prepare for the task. Create a checklist of all the household surfaces that requires dusting.
Then gather all the essential tools at one place like duster, broom, sponge, spray bottle, wipes, squeegee, etc. It will save your time during the dusting process. If you prefer green cleaning, then prepare your solutions using natural ingredients.
Step 2: Clear the Clutter
Once you are done with the planning, it is time to clear the clutter in your rooms. People often skip this step and start dusting and scrubbing straightaway, which make the task difficult for them.
So, make your bed, remove your clothes from the couch, toss the chocolate wrappers into the garbage can, and pick up the toys spread across the rooms. Once you are satisfied that the rooms are free from clutter, start the dusting.
Step 3: Remove the Loosen Dust
Different household surfaces like ceiling fans, walls, light fittings, windows, carpets, etc., accumulate a lot of dust over time. So, when you want to clean your home thoroughly, you should first target these spots. So, grab a broom and microfiber cloth to clean the fan’s blades, remove cobwebs, dust from light fixtures and vacuum the carpets.
When you remove the dust and dirt from various surfaces, make sure you follow the top to bottom approach. It will save you from the hassles of sweeping the floor more than once. Professionals who offer the best
bond cleaning in Brisbane also do the same thing and follow a step-by-step house cleaning checklist.
Step 4: Eliminate the Stubborn Dirt
After removing the loose dust from the surfaces, it is time to get rid of the stubborn dirt. For that, you need to apply a cleaning solution on the surfaces and scrub it properly with a scrubber, brush or sponge. Spots like your toilet, bathtub, sink, kitchen and bathroom tiles, etc., need proper scrubbing.
After removing the dirt, rinse them properly and make sure they look sparkling clean. You can use branded products during this stage that are easily available in the market of Brisbane, Queensland. However, it is advisable to follow green cleaning as it will make your home a healthier place in the true sense.
Step 5: Allow the Spots to Get Dry
It is a very important step that the majority of people overlook. After you clean and rinse a household surface, remove the moisture as much as possible and allow it to get dry before you disinfect the spot.
It is essential because when you apply the solution on a wet surface, the effectiveness of the disinfectant reduces. As a result, it fails to destroy the germs and bacteria properly. So, do not hustle during the cleaning process and only disinfect a place when there is no moisture at all.
Step 6: Disinfect the House
If you want to disinfect your house effectively, then you need to know the right areas to focus on. After cleaning your home properly,
disinfect the high-touch points in all the rooms.
These spots include the doorknobs, handle of the appliances, drawers and cabinets, flush lever of the toilet, faucets, light switches, and so on. Instead of branded disinfectants, you can use rubbing alcohol or hydrogen peroxide.
Step 7: Wait before you wipe the Surface
One of the common mistakes that people make during sanitisation is they wipe the surface immediately after applying the disinfectant. The solution needs a few minutes to start working, so wiping it immediately means the germs and bacteria are still there. So, after applying the solution on a surface, wait for around 5 minutes and then wipe with a clean cloth.
The Bottom Line
Effective house cleaning and disinfecting are essential to
keep infections and diseases at bay. However, you need to make sure that you carry out the task in the correct way.
Otherwise, you won’t get the result you want. To make the task easier, you can either follow the steps mentioned above or hire certified bond cleaners in Brisbane. They will save your time and give you the best possible result.
